Tony E Burgess
394 Will Lucas Road, Linden, NC 28356
Email:TOPWRENCH2005[at]AOL.COM
Home: (910) - 436-0156 Work: (910) - 322-6025
Summary of Qualifications:
Experienced with over 29 years of Maintenance Management duties. Proficient at the following:
¿ Quality Control/Assurance
¿ Safety and Risk Management
¿ Planning and Budgeting
¿ Mechanical Services and over-hauling
¿ Automotive Shop Supervision
¿ Automotive paint and body
Work Experience:
ITT Corporation, Fort Bragg, NC (03/2007 - Present)
Technical Inspector
Duties: Provide daily technical assistance to over 60 employees. Plans work schedules, sequence of operations and distribution of work; designates inspectors and assigns inspections; explains inspections requirements, methods, and procedures; instructs on new or changed procedures; and assists with resolving problems. Operates and inspects machines and equipment to diagnose defects. Examines parts for damage and or excessive wear using micrometers and gauges. Diagnose vehicle problems to include engines, transmissions and drive trains to verify faults. Provides guidance and assistance to personnel on current state of the art principals, practices, and procedures to be employed, quantity and quality of work expected and tools and materials to be used. Performed the full range of both Field and Sustainment-Level Initial, In-progress and Final inspection for all heavy and light wheeled vehicles, trailers, shelters, fuel and water tanks and accessory. Prepared Quality Deficiency Reports and Reports of In-Shipment Discrepancies. Knowledgeable of vehicle classification, technical manuals, bulletins and written directives in the performance of inspections. Test overhauled/repaired equipment to ensure operation efficiency. Knowledgeable in Chemical Agent Resistant Coatings known as C.A.R.C. paint. Also have used various types of C.A.R.C. such as water disbursable and single stage solvent base C.A.R.C. on military equipment at the DOL/MMD Compound. Conducted Safety briefings during employment with ITT. Received Certificate in Lean Six Sigma, Green Belt training. Completed Harvard online courses for leadership training at ITT.
MOB Performance, Fayetteville, NC (10/2006 - 03/2007)
Vehicle Maintenance Control and Analysis
Duties: Managed daily activities of maintenance schedules and notified customers of vehicle pending services. Assessed the work performance of employees by comparing maintenance schedules to records of work actually completed. Formulated charts and reports to track maintenance activities and quantity of mechanics and spare parts required to maintain equipment in good operating condition. Operated computers and other office equipment to input and access maintenance data.
Powers-Swain Chevrolet, Fayetteville, NC (08/2004-10/2006)
Automotive Repair Specialist
Duties: Analyzed serviceability of vehicle systems, assemblies or subassemblies, and the need for repair. Analyzes malfunctions by visual and auditory examination or through the use of test equipment. Repairs, adjusts, overhauls, or replaces major assemblies or subassemblies such as engine mechanical, electrical, air-conditioning, fuel, emission, power train, brake, steering and suspension systems. Removes and disassembles gasoline or diesel engines and components. Repairs components by replacing worn or damaged parts with new or reconditioned parts. Reassembles, adjusts and tests repaired units for proper operation.
T&E Automotive, Fayetteville, NC (05/1980-08/2004)
Owner-Operator-Mechanic
Duties: Direct Control of daily operations, quality, budget, and customer service and customer satisfaction. Budgeted daily activities worth over $80,000 of parts and accessories. Conducted major and minor automotive maintenance on cars, trucks, gasoline engines, electrical systems, automatic and manual transmissions, differentials, brakes. Performed various types of auto and truck paint and body using HVLP paint systems and a wide variety of paints to include solvent and water disbursable paints. Conducted Visible Emissions on the paint booths to ensure proper filtration of harmful VOC\'S being released in the air. Conducted inventory and ordering of all products used in the paint booths and maintaining a reasonable stock of all paints, masking paper and other shop supplies that were needed throughout the shop. Performed extensive maintenance on diesel engines, tuned up engines through replacement of worn or faulty parts, carburetor cleaning and adjustment, ignition system adjustment. Performed air conditioning system maintenance. Engineered construction jobs throughout the area, building small sheds, running electrical wiring and connections, painting, roofing and plumbing.
Local Auto Parts, Fayetteville, NC (05/1980-05/1982)
Machinist
Duties: Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations, Calculated dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and venire calipers. Machine parts to specifications using machine tools such as lathes, milling machines, shapers, or grinders. Specialized in the machining of big block and small block engines.
Cape Fear Cable/Southern Communication, (06/1998-06/1999)
Fayetteville, North Carolina
Cable Installer
Duties: Installs and repairs underground conduit and cable systems used to conduct electrical energy between substations and consumers: Installs and repairs conduits following blueprints. Pulls cables through ducts [Cable Puller (construction; utilities)]. Splices cables together or to overhead transmission line, customer service line, or street light line [Cable Splicer (construction; tel. & tel.; utilities)]. Installs and repairs transformers, fuse boxes, bus bars, relays, and other electrical equipment in manhole and underground substations [Underground Repairer (utilities)] according to wiring diagrams and specifications. Re-insulates or replaces worn cables and wires. Tests electric cables and equipment wiring to detect broken circuits or incorrect connections, using test lamp, voltmeter, ammeter, and thermocouple indicator.
Education/Additional Information
GED-Fayetteville Technical Institute, June 1988
Certificate Lean Six Sigma, Green Belt training March 2008
Current North Carolina Class A Motor Vehicle Operator
Certified Wire MIG Operate/ Welder
Certified Recovery Vehicle Operator
ITT Corporation-Employee of the 1st Quarter (2009)
Certificate MRAP Training Fort Bragg
DOD Anit-Phishing Course, DOD Personally Identifiable Information Course
DOD Information Assurance Awareness Course
Army Traffic Safety Program Accident Avoidance Course
Safety Training Course
ITT Leadership Course 101 and 201
Supervisor Certificate
